🔒
Welcome at Praezi >Login Webshop
search languages menu
DEENFRhuRU
Sonderabmessungen konfigurieren To the cart

AISI H 11 ESR

Selected article

PRÄZI Flat steel

Thickness Tolerances: Thickness +0,25/0 mm, Width +0,40/0 mm, Length +30/0 mm Prices in € per piece (valid only for the German market)
Width
(mm)
4,4 5,4 6,4 8,4 10,4 12,4 15,4 20,4 25,4 30,4 40,4 50,4 60,4 80,4 100,4
8,4 37 38 40                        
10,4 38 39 42 45                      
12,4 39 40 44 46 51                    
15,4 40 41 46 47 55 83                  
20,4 42 44 51 53 62 88 91                
25,4 47 48 53 56 68 97 98 101              
30,4 49 51 58 60 73 108 113 115 125            
40,4 55 56 66 70 85 120 125 129 147 199          
50,4 63 64 73 77 88 131 138 156 180 231 268        
60,4 68 69 82 85 104 149 155 178 205 263 302 385      
80,4 81 83 97 100 134 143 182 223 255 327 371 463 543    
100,4 96 98 115 119 160 183 225 266 303 390 439 541 655 787  
120,4       130 170 191 263 310 352 448 507 623 759 914 1169
150,4       153 223 268 321 375 424 537 610 749 914 1108 1443
200,4       193 270 353 420 486 546 683 780 956 1198 1452 1851
250,4       235 329 440 517 595 668 829 951 1164 1442 1757 2249
300,4       276 377 525 615 704 790 975 1124 1369 1707 2083 2666

PRÄZI square bar

with machining allowance 1000 mm
Thickness
Length (mm) 8,4 10,4 12,4 15,4 20,4 25,4 30,4 40,4 50,4 60,4 80,4 100,4
1000 39 50 81 85 98 115 173 233 326 448 661 1004
Tolerances for cross section +0,25/0 mm
Thickness Tolerances: Thickness +0,25/0 mm, Width +0,40/0 mm, Length +20/0 mm Prices in € per piece (valid only for the German market)
Width
(mm)
4,4 5,4 6,4 8,4 10,4 12,4 15,4 20,4 25,4 30,4 40,4 50,4 60,4 80,4 100,4
8,4 22 23 24                        
10,4 23 24 25 27                      
12,4 24 25 27 28 31                    
15,4 25 27 28 29 33 50                  
20,4 27 28 31 32 37 53 55                
25,4 28 29 32 34 41 58 59 60              
30,4 30 31 35 36 45 66 68 69 75            
40,4 33 34 39 42 51 72 75 77 88 119          
50,4 37 38 45 47 53 80 83 93 108 139 161        
60,4 40 41 49 51 63 89 93 107 123 158 181 231      
80,4 49 50 58 60 81 86 109 134 153 196 223 278 325    
100,4 57 58 69 71 97 110 135 160 182 234 263 324 393 472  
120,4       78 102 115 158 186 211 269 304 374 456 548 702
150,4       92 134 161 193 225 254 322 366 449 548 665 867
200,4       116 162 212 252 292 328 409 469 574 719 871 1113
250,4       141 197 264 311 357 401 498 570 698 865 1055 1351
300,4       165 227 315 369 422 474 585 674 822 1024 1250 1599

PRÄZI square bar

with machining allowance 500 mm
Thickness
Length (mm) 8,4 10,4 12,4 15,4 20,4 25,4 30,4 40,4 50,4 60,4 80,4 100,4
500 23 30 49 51 58 69 104 140 208 269 396 602
Tolerances for cross section +0,25/0 mm

PRÄZI ground steel plates

Thickness
Width
(mm)
10,4 15,4 20,4 25,4 30,4 40,4 50,4 60,4 70,4 80,4 90,4 100,4
52 39 52 69 80 101 118 151          
62 46 62 79 90 116 133 169 196        
72 54 71 88 100 130 147 186 217 239      
83 64 81 97 112 143 162 202 237 262 293    
93 73 90 107 121 157 176 219 257 286 317 352  
103 81 98 117 133 170 192 237 276 309 342 378 404
113 88 107 125 143 184 207 255 298 332 366 403 434
123 96 116 136 154 196 221 272 319 356 392 429 464
133 104 124 145 164 209 237 291 341 378 417 457 494
143 112 133 155 174 221 251 309 362 402 442 483 523
153 118 141 165 186 235 266 326 383 425 468 511 553
163 125 149 174 196 247 282 345 404 448 494 538 584
173 133 159 184 207 260 296 363 425 472 519 566 613
183 140 166 193 217 272 311 381 446 495 544 694 642
193 147 174 202 227 286 325 399 468 519 570 621 672
203 155 184 212 239 298 339 417 490 542 595 648 702
213 162 192 221 249 311 356 435 511 566 621 676 731
223 171 200 231 260 323 370 453 531 589 646 704 761
233 179 209 241 270 336 385 471 553 613 672 731 791
243 185 217 250 281 349 400 489 574 636 697 761 821
253 192 226 260 292 362 415 508 596 660 723 787 850
263 199 235 269 302 374 429 525 617 682 748 815 880
273 208 243 279 313 388 444 543 638 705 774 842 909
283 215 251 288 323 400 460 562 660 729 799 870 940
293 223 260 298 334 413 474 579 680 752 825 897 969
303 230 268 308 345 425 490 597 701 776 850 925 999
313 237 276 317 356 438 504 616 723 799 876 952 1028
323 245 286 326 366 451 519 634 744 823 901 979 1058
333 253 294 336 376 464 534 651 765 846 926 1007 1089
343 261 302 346 387 476 548 670 787 870 952 1035 1118
353 266 311 356 409 490 594 688 807 893 978 1062 1148
363 275 319 365 419 501 578 705 829 916 1003 1091 1177
373 284 327 374 429 515 594 724 850 940 1029 1118 1206
383 290 336 385 440 527 609 742 872 963 1054 1145 1236
393 298 345 394 451 540 623 760 883 986 1079 1173 1267
403 307 353 403 462 462 638 778 914 1009 1105 1201 1296
413 315 362 413 472 566 652 796 935 1032 1131 1229 1326
423 324 370 422 483 578 668 814 956 1056 1156 1256 1356
433 333 379 433 493 591 682 832 978 1079 1182 1283 1385
443 341 388 441 504 603 697 850 999 1103 1207 1311 1415
453 349 396 451 515 617 712 868 1021 1126 1233 1339 1446
463 357 404 461 525 629 727 918 1042 1150 1258 1366 1475
473 364 413 470 536 642 742 905 1062 1173 1284 1396 1504
483 371 421 479 546 655 756 922 1084 1197 1309 1422 1534
493 378 429 490 558 668 772 941 1105 1220 1334 1449 1564
503 386 438 499 568 680 787 958 1127 1244 1360 1477 1593
Tolerances: Outer edges sawn
Thickness +0,25/0 mm, Width +3/0 mm, Length +20/0 mm

AISI H 11 ESR Data sheet download

Hot forming tool steel More Information

Technical delivery terms PRÄZI Flachstahl

( Dimensions in mm )

Range of application:
These specifications apply for fine-machinedbars in the followngi ranges of application:

  • from 10 to 500 mm width for flat steel dimensions
  • from 1 to 100 mm thickness for flat steel dimensions
  • 500, 1000 and 1030 mm length for flat steel dimensions
  • from 4 to 150 mm side length for square steel dimensions.
  • It does not apply to:
  • bright flat steel according to DIN EN 10278
  • bright squares according to DIN EN 10278
  • cold-rolled steel strip according to DIN EN 10140

Concept
Precision flat steel and square steel are sharp-edged bars with fine
machined longitudinal surfaces free of decarburisation.

Designation
The following are to be indicated in the designation in the seuqence given below:

  • Name (PRÄZI Flachstahl)
  • Delivery conditions (DIN 59350,mit Bearbeitungsaufmaß)
  • Abbreviation or material number
  • Nominal sizes (flat steel: width, thickness, length; square steel: thickness, length)

Example:

PRÄZI Flachstahl DIN 59350
1.2842 150 x 30 x 100 mm

PRÄZI Flachstahl mit Bearbeitungsaufmaß
1.2436 Vkt. 20,4 x 1030 mm

Dimensions, permissible dimensional deviations and deviations of form
The permissible deviations from the nominal sizes are as follows:

For PRÄZI- flat steel according to DIN 59 350

Thickness grounded / fine-machined Tol.: +0,05 / - 0 mm
Width grounded / fine-machined Tol.: +0,2 / - 0 mm

Length, one fine-machined end face,
one rough-machined end face

Tol.: +5 mm
 Square steel dimensions, thickness Tol.: +0,05 / - 0 mm

 

For PRÄZI- flat steel according to DIN 59 350 with machining allowance:

Thickness grounded / fine-machined Tol.: +0,2 / - 0 mm
Width grounded / fine-machined Tol.: +0,2 / - 0 mm

Length, one fine-machined end face,
one rough-machined end face

Tol.: +5 mm
Square steel dimensions , thicknessTol.: +0,20 / - 0 mm

 

Angular deviation for PRÄZI- flat steel according to DIN 59350
The permissible angular deviation between the side faces and between
the end faces and these faces 0°15´.

For PRÄZI flat steel with machining allowance:

Thickness grounded / fine-machined Tol.: + 0,25 / - 0 mm
Width grounded / fine-machined Tol.: + 0,4 / - 0 mm

Length fine-machined / sawn length 500 mm

Tol.: + 20 mm
Length fine-machined / sawn length 1030 mm Tol.: +/- 20 mm
Square steel dimensions , thickness Tol.: + 0,25 / - 0 mm

 

Angular deviation
The permissible angular deviation between the side faces is 0°15´.

Parallelism
The parallelism lies within the permissible dimensional tolerances. Deviations
therefrom are to be agreed when ordering.

Surface roughness
The figures for the peak-to-valley height relate in the case of

  • precision flat steel to the wide longitudinal sides
  • precision square steel bars to all longitudinal sides

It is for

  • bars without machining allowance     Ra ≤ 2 μm
  • bars with machining allowance           Ra ≤ 6 μm
  • bars with machining over-measure    Ra ≤ 6 μm

Heat treatment condition
The steels are normally delivered in a soft-annealed condition, other
heat treatment conditions are to be agreed when ordering.

Planeness and straightness
The deviation from the planeness and straightness are indicated in
the table below. They are measured on an individual piece along the
longitudinal and short sides with a feeler gauge. The test specimen is
to lie freely on a plane board.

Width (mm) thickness ( mm )
  >1 ≤2,2 >2,2 ≤5,2 >5,2 ≤10,4 >10,4 ≤20,4 >20,4
≤ 100,3 (1,0) 0,8 0,7 0,5 0,3
>100,3 ≤200,3 (1,5) 1,1 0,8 0,6 0,4
>200,3 ≤300,3 (2,0) 1,5 0,9 0,8 0,5
 >300,3 ≤500,3 (2,3)  2,0 1,2 1,0 0,8

For the small thicknesses, changes in planeness are possible.
Figures in brackets are only approximate values.

Delivery terms

Terms of delivery
Export

All prices are quoted in Euro per unit,
ex works, excluding packaging, plus alloy
surcharges
. Valid
from 01.05.15.

Minimum order quantity:
There are no minimum order quantities.
From an order value higher than
250 Euros, delivery is effected free german
border including packaging (CPT,
German Border, ICC-Incoterms 2010).

Shipping:
Consignments of goods up to 40
kg are delivered via parcel service.
Consignments of goods above 40
kg are delivered by a forwarding
agent. The receiver has to bear all
the risks during the transport.

Shipping costs:
Parcel shipment is effected at cost
price. Consignments that can be separated
are split up into several parcels
to your advantage. Shipped parts with
a weight of more than 40 kg are delivered
by a freight forwarder (Freight
charges available on request).

Scale of prices:

Order value Quantity discount
 
0 to 250 Euro Order value   plus freight charges
and packaging
 
   > 250 Euro Order value   free German border
 
   > 2000 Euro Order value   less 4 %
 
   > 4000 Euro Order value   less 6 %
 
   > 6000 Euro Order value   less 8 %
 
   > 8000 Euro Order value   less 10 %

 

Delivery time:
All standard PRÄZI-flat steels are available
at the day of order. Orders, we receive
by 13:00 hrs, are shipped on the
same day.

Our currently valid alloy surcharges are stored here

The general business terms and conditions from PRÄZI–Flachstahl AG are stored here.

Alloy surcharges for PRÄZI flat steel deliveries

Alloy surcharges for PRÄZI flat steel deliveries

Information about the current alloy surcharges is available on request
E-Mail: verkauf(at)praezi(dot)de.

You are an registered shop-customer? After successful login, you can inform yourself in our webshop about the current alloy surcharges.

menu
A PRÄZI cookie-kat használ annak érdekében, hogy webhelyünkön az Ön látogatása kényelmesebb legyen. Az „OKAY” gombra kattintva Ön – a cookie-beállításainak megváltoztatása nélkül – beleegyezését adja számunkra a cookie-k használatához. További információkért olvassa el a cookie-kkal kapcsolatos irányelveinket.
OKAY