Rundstahl
Bestellung direkt über Tel. 0 25 82 - 76 130 oder unter verkauf@praezi.de
Technical delivery terms PRÄZI Flachstahl
( Dimensions in mm )
Range of application:
These specifications apply for fine-machinedbars in the followngi ranges of application:
- from 10 to 500 mm width for flat steel dimensions
- from 1 to 100 mm thickness for flat steel dimensions
- 500, 1000 and 1030 mm length for flat steel dimensions
- from 4 to 150 mm side length for square steel dimensions.
- It does not apply to:
- bright flat steel according to DIN EN 10278
- bright squares according to DIN EN 10278
- cold-rolled steel strip according to DIN EN 10140
Concept
Precision flat steel and square steel are sharp-edged bars with fine
machined longitudinal surfaces free of decarburisation.
Designation
The following are to be indicated in the designation in the seuqence given below:
- Name (PRÄZI Flachstahl)
- Delivery conditions (DIN 59350,mit Bearbeitungsaufmaß)
- Abbreviation or material number
- Nominal sizes (flat steel: width, thickness, length; square steel: thickness, length)
Example:
PRÄZI Flachstahl DIN 59350
1.2842 150 x 30 x 100 mm
PRÄZI Flachstahl mit Bearbeitungsaufmaß
1.2436 Vkt. 20,4 x 1030 mm
Dimensions, permissible dimensional deviations and deviations of form
The permissible deviations from the nominal sizes are as follows:
For PRÄZI- flat steel according to DIN 59 350
Thickness grounded / fine-machined | Tol.: +0,05 / - 0 mm |
Width grounded / fine-machined | Tol.: +0,2 / - 0 mm |
Length, one fine-machined end face, | Tol.: +5 mm |
Square steel dimensions, thickness | Tol.: +0,05 / - 0 mm |
For PRÄZI- flat steel according to DIN 59 350 with machining allowance:
Thickness grounded / fine-machined | Tol.: +0,2 / - 0 mm |
Width grounded / fine-machined | Tol.: +0,2 / - 0 mm |
Length, one fine-machined end face, | Tol.: +5 mm |
Square steel dimensions , thickness | Tol.: +0,20 / - 0 mm |
Angular deviation for PRÄZI- flat steel according to DIN 59350
The permissible angular deviation between the side faces and between
the end faces and these faces 0°15´.
For PRÄZI flat steel with machining allowance:
Thickness grounded / fine-machined | Tol.: + 0,25 / - 0 mm |
Width grounded / fine-machined | Tol.: + 0,4 / - 0 mm |
Length fine-machined / sawn length 500 mm | Tol.: + 20 mm |
Length fine-machined / sawn length 1030 mm | Tol.: +/- 20 mm |
Square steel dimensions , thickness | Tol.: + 0,25 / - 0 mm |
Angular deviation
The permissible angular deviation between the side faces is 0°15´.
Parallelism
The parallelism lies within the permissible dimensional tolerances. Deviations
therefrom are to be agreed when ordering.
Surface roughness
The figures for the peak-to-valley height relate in the case of
- precision flat steel to the wide longitudinal sides
- precision square steel bars to all longitudinal sides
It is for
- bars without machining allowance Ra ≤ 2 μm
- bars with machining allowance Ra ≤ 6 μm
- bars with machining over-measure Ra ≤ 6 μm
Heat treatment condition
The steels are normally delivered in a soft-annealed condition, other
heat treatment conditions are to be agreed when ordering.
Planeness and straightness
The deviation from the planeness and straightness are indicated in
the table below. They are measured on an individual piece along the
longitudinal and short sides with a feeler gauge. The test specimen is
to lie freely on a plane board.
Width (mm) | thickness ( mm ) | ||||
>1 ≤2,2 | >2,2 ≤5,2 | >5,2 ≤10,4 | >10,4 ≤20,4 | >20,4 | |
≤ 100,3 | (1,0) | 0,8 | 0,7 | 0,5 | 0,3 |
>100,3 ≤200,3 | (1,5) | 1,1 | 0,8 | 0,6 | 0,4 |
>200,3 ≤300,3 | (2,0) | 1,5 | 0,9 | 0,8 | 0,5 |
>300,3 ≤500,3 | (2,3) | 2,0 | 1,2 | 1,0 | 0,8 |
For the small thicknesses, changes in planeness are possible.
Figures in brackets are only approximate values.
Delivery terms
Terms of delivery
Export
All prices are quoted in Euro per unit,
ex works, excluding packaging, plus alloy
surcharges . Valid
from 01.05.15.
Minimum order quantity:
There are no minimum order quantities.
From an order value higher than
250 Euros, delivery is effected free german
border including packaging (CPT,
German Border, ICC-Incoterms 2010).
Shipping:
Consignments of goods up to 40
kg are delivered via parcel service.
Consignments of goods above 40
kg are delivered by a forwarding
agent. The receiver has to bear all
the risks during the transport.
Shipping costs:
Parcel shipment is effected at cost
price. Consignments that can be separated
are split up into several parcels
to your advantage. Shipped parts with
a weight of more than 40 kg are delivered
by a freight forwarder (Freight
charges available on request).
Scale of prices:
Order value | Quantity discount | ||
0 to | 250 Euro Order value | plus freight charges and packaging | |
> | 250 Euro Order value | free German border | |
> | 2000 Euro Order value | less 4 % | |
> | 4000 Euro Order value | less 6 % | |
> | 6000 Euro Order value | less 8 % | |
> | 8000 Euro Order value | less 10 % |
Delivery time:
All standard PRÄZI-flat steels are available
at the day of order. Orders, we receive
by 13:00 hrs, are shipped on the
same day.
Our currently valid alloy surcharges are stored here
The general business terms and conditions from PRÄZI–Flachstahl AG are stored here.
Alloy surcharges for PRÄZI flat steel deliveries
Alloy surcharges for PRÄZI flat steel deliveries
Information about the current alloy surcharges is available on request
E-Mail: verkauf(at)praezi(dot)de.
You are an registered shop-customer? After successful login, you can inform yourself in our webshop about the current alloy surcharges.